{"title":"(Copy) XGuardRC1","description":"","products":[{"product_id":"xglow-pro-ice-glow-plug-igniter","title":"XGlow Pro ICE Glow Plug Igniter","description":"\u003cp\u003eNow compatible with 12V systems! (6V-12V).\u003c\/p\u003e\n\u003cp\u003eThe XGlow Pro ICE builds on the most popular Glow igniter today and it’s improved in several ways.\u003cbr\u003eThe same improvements from the V3 are included in the ICE version but a switch to a cold operating technology was added lowering the working temperature dramatically.\u003cbr\u003eLike the V3, the ICE has a replaceable screw-type case for when you want to have the case replaced. New firmware increases protection of the glow plugs. Colder operation due to the ICE tecnology, reverse polarity protection, louder buzzer with new technology. The XGlow Pro ICE is the most advanced glow igniter to date. It includes the standard glow igniter function but it adds additional functions like anti-chicken-dance, anti-hot-starts, good-bad glow plug sensor, wide voltage range of 6V-12V providing constant glow-plug glowing at any voltage level, craft Locator Buzzing Horn controlled by a radio switch. Voltage monitor with LED lights and emergency Buzzing Horn when critical low and when Anti-Hot-Starts feature is activated.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e***Note***: To activate the Switch from the radio function, press and hold the red button while powering up. When active, the unit will flash all lights three times when powered up. When not active they will flash only once.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIf you have the NMP dual plug head for the OS105 and want the dual plug alligator cable also buy the\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/xguardrc.com\/product\/upgrade-for-xglow-pro-igniter-to-dual-plug-drive\/\"\u003eupgrade to dual plug AAVXG01212\u003c\/a\u003e\u003c\/p\u003e","brand":"XGuardRC","offers":[{"title":"Default Title","offer_id":45853943791790,"sku":"AAVXG0201-ICE","price":95.15,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1625\/9955\/files\/XGlowProICEdescriptiveImage-1.png?v=1729448087"},{"product_id":"xguard-self-calibrating-v2-backplate-rpm-sensor-with-agc-static-discharge-esd-protection-and-sensor-power-buffering","title":"XGuard Self-Calibrating V2 Backplate RPM Sensor with AGC, Static discharge ESD protection and sensor power buffering","description":"\u003cdiv class=\"elementor-element elementor-element-f34cfc8 elementor-widget elementor-widget-spacer\" data-id=\"f34cfc8\" data-element_type=\"widget\" data-widget_type=\"spacer.default\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003cdiv class=\"elementor-spacer\"\u003e\n\u003cdiv class=\"elementor-spacer-inner\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"elementor-element elementor-element-34154da elementor-widget elementor-widget-jet-single-excerpt\" data-id=\"34154da\" data-element_type=\"widget\" data-widget_type=\"jet-single-excerpt.default\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003cdiv class=\"elementor-jet-single-excerpt jet-woo-builder\"\u003e\n\u003cdiv class=\"woocommerce-product-details__short-description\"\u003e\n\u003cp\u003e\u003cstrong\u003eNote: Compatible with OS-105, OS-91, OS-55 and OS-50.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe XGuard Self-Calibrating V2 Back Plate RPM Sensor with Static discharge protection and sensor power buffering is the most advanced Back Plate RPM Sensor to date.\u003c\/p\u003e\n\u003cp\u003eThis sensor instead of having a fixed trigger point that might work or not with your particular engine, it works by sensing the magnetic field variation of the first pulses and calibrates itself to the ideal magnetic field trigger point for that particular engine.\u003c\/p\u003e\n\u003cp\u003eIt measures the max and min magnetic field via an amplified hall-effect sensor and calculates the ideal trigger point for that particular range your engine presents to the sensor. This effectively self-calibrates the sensor to work optimally in your engine.\u003c\/p\u003e\n\u003cp\u003ePlease pay attention to the correct positioning of the sensor below:\u003c\/p\u003e\n\u003cp\u003e\u003cimg loading=\"lazy\" class=\"alignnone wp-image-6105\" src=\"https:\/\/xguardrc.com\/wp-content\/uploads\/2021\/10\/BackPlateSensorPositioning-300x268.png\" alt=\"\" width=\"640\" height=\"572\"\u003e\u003c\/p\u003e\n\u003cp\u003eSensor kit Includes:\u003cbr\u003e1 Sensor PCB with SMD components and servo-type extension.\u003cbr\u003e1 Mounting plate for 91-105-120 class engines\u003cbr\u003e1 Mounting plate for 50-55 class engines\u003cbr\u003e3 M3 nuts\u003cbr\u003e3 M3 x 8mm button head screws\u003cbr\u003e1 90 degree mounting block\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"XGuardRC","offers":[{"title":"Default Title","offer_id":45853945495726,"sku":"AAVXG0262-V2","price":55.13,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1625\/9955\/files\/EngineOnly5-150x150_1.png?v=1729448800"},{"product_id":"xguard-rpm-sensor-for-os-max-gasser-ignition-systems-power-buffer-and-esd-protector","title":"XGuard RPM Sensor for OS Max Gasser Ignition Systems, power buffer and ESD Protector","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThere’s a new generation of RC Helicopters just being brought to the market that use the Helicopter version of the OS gasser engines. People that have them are usually forced to install separate sensors and magnets to make them work. This unit allows to use the built-in OS sensor to generate signals that are directly compatible with the RPM ports of all the flight controllers.\u003c\/p\u003e\n\u003cp\u003eThe rpm sensor conversion box will simply send a pulse every time the magnet passes by the OS Sensor to the FBL of your choice. The box doesn’t change anything about the pulse. It’s simply a copy of the OS sensor but compatible with the FBL RPM inputs. RPM calculations are done at the radio so you need to enter the correct gear ratio in your governor setup to get the right RPMs displayed in your radio.\u003c\/p\u003e\n\u003cp\u003eSensor Includes:\u003cbr\u003e1 XGuard RPM Sensor for OS Max Gasser Ignition Systems\u003cbr\u003e1 Servo Extension for connecting to OS GT33 Sensor\u003c\/p\u003e","brand":"XGuardRC","offers":[{"title":"Default Title","offer_id":45853948281006,"sku":"AAVXG0269","price":55.13,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1625\/9955\/files\/OSRpmSensorManual-640x640.jpg?v=1729449141"},{"product_id":"xguard-intelliswitch-switch-with-dual-solid-state-relay-and-aircraft-locator-buzzer","title":"XGuard IntelliSwitch – Switch with dual solid state relay and aircraft locator buzzer","description":"\u003cp\u003eXGuard IntelliSwitch – Switch with dual solid state relay and aircraft locator buzzer\u003c\/p\u003e\n\u003cp\u003eMassive dual Solid State Relays for ultra-reliability under peak loads and redundancy safety.\u003c\/p\u003e\n\u003cp\u003eCurrent Capacity limited by the cable wires used.\u003c\/p\u003e\n\u003cp\u003ePre-Installed AWG 14 Cables compatible with your EC3 or XT60 Connectors\u003c\/p\u003e\n\u003cp\u003eIlluminated light pipes one GREEN for when everything is OK and one RED when a critical low voltage is detected or blinking RED when below minimum recommended voltage.\u003c\/p\u003e\n\u003cp\u003eScrew-Type terminal for larger gauge Wires for High-Current applications.\u003c\/p\u003e\n\u003cp\u003eDouble the servo output connectors adds redundancy and doubles current capacity\u003c\/p\u003e\n\u003cp\u003e100 dB Buzzer as low-level battery indicator \u0026amp; Aircraft Locator.\u003c\/p\u003e\n\u003cp\u003eTwo types of Battery Chemistry\u003cbr\u003e• 7.4V Lipo (2S)\u003cbr\u003e• 7.2V Ni-Mh (6 cell)\u003cbr\u003e• Note: (LiFe packs can also be used but it will only warn if voltage drops below 6.2V)\u003c\/p\u003e\n\u003cp\u003eWEIGHT:\u003c\/p\u003e\n\u003cp\u003eSwitch itself without wires:…………………..12.2 grams (0.43 oz)\u003cbr\u003ePair of 8 inch 14 AWG wires:……………….10.9 grams (0.38 oz)\u003cbr\u003eUnit with wires:…………………………………..23.1 grams (0.81 oz)\u003cbr\u003e(Note: Wires can be shortened to match your specific need)\u003c\/p\u003e","brand":"XGuardRC","offers":[{"title":"Default Title","offer_id":45853950148782,"sku":"AAVXG0270","price":55.13,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1625\/9955\/files\/IntelliswitchAd4-640x640.png?v=1729449550"},{"product_id":"ultra-high-precision-carbon-fiber-pitch-gauge-phone-holder-for-the-ircha-app","title":"Ultra-High precision carbon fiber Pitch Gauge phone holder for the IRCHA App","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003e*** IMPORTANT NOTE ***\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003eThis product is sold mostly to help pay for the development costs of the IRCHA RC Toolbox App. The iPhone development is done in-house but a good portion of the Android development is hired out and paid to outside consultants and this requires funds to keep the Android applications up to date.\u003c\/p\u003e\n\u003cp\u003eThis is an Ultra-High precision Pitch Gauge phone holder for the IRCHA RC Toolbox App. The design is optimized for repeatability so that the unit can be switched between blades and the precision is maintained. once it’s tightened again. The sensitivity and precision of the phone accelererometers plus the use of high-powered DSP digital filters inside the app makes this pitch gauge the most accurate currently available. It can take a phone as wide as 89mm by any length. It can take blades with a chord of 18mm to 77mm wide and to any length.\u003c\/p\u003e","brand":"XGuardRC","offers":[{"title":"Default Title","offer_id":45853976363182,"sku":"AAVXG0450","price":82.73,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1625\/9955\/files\/PitchMount.png?v=1729450103"},{"product_id":"blade-simulator-for-pitch-gauge","title":"Blade Simulator for Pitch Gauge","description":"\u003cp\u003e\u003cspan\u003eBlade Simulator for Pitch Gauge for use with the AAVXG0450 Ultra-High precision carbon fiber Pitch Gage phone holder for the IRCHA RC Heli Toolbox App.No need to use a blade when doing setups with this device. Made out of semirigid material resistance to summer heat.\u003c\/span\u003e\u003c\/p\u003e","brand":"XGuardRC","offers":[{"title":"Default Title","offer_id":45853990224046,"sku":"AAVXG0454","price":20.63,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1625\/9955\/files\/AAVXG0454.jpg?v=1729450783"},{"product_id":"xguard-rpm-supersensor-for-zenoah-gassers-with-static-discharge-protection-power-buffering","title":"XGuard RPM SuperSensor for Zenoah GASSERS with Static discharge protection \u0026 power buffering","description":"\u003cp\u003eThe XGuard RPM SuperSensor for Zenoah GASSERS with Static discharge protection \u0026amp; power buffering is the most advanced RPM sensor to date. We recently discovered that in some cases the rotating elements passing near an RPM sensor can generate Electro Static Discharges (ESD). These have the risk of confusing or even damaging your receiver\/fbl unit. The manufacturers of sensors also require that the power feeding the sensor be buffered next to the sensor to prevent false pulse signals. Based on these requirements we developed the first RPM Sensor with Static Electricity protection and power buffering at the sensor. This sensor provides the cleanest and most precise RPM pulse to date.\u003c\/p\u003e\n\u003cp\u003eSensor Includes:\u003cbr\u003e1 XGuard RPM SuperSensor for Zenoah GASSERS with Static discharge protection \u0026amp; power buffering\u003c\/p\u003e","brand":"XGuardRC","offers":[{"title":"Default Title","offer_id":48003415048366,"sku":"AAVXG0268","price":40.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1625\/9955\/files\/AAVXG0268-3-640x640.png?v=1781994657"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1625\/9955\/collections\/Screenshot_2024-10-20_12.05.01_PM_46c2a795-0b88-4a25-9cc2-1197c21bb7c7.png?v=1771814942","url":"https:\/\/www.thehelihangar.ca\/collections\/copy-xguardrc1.oembed","provider":"Hangar 5 RC Hobby Store -The Heli Hangar and Hobby","version":"1.0","type":"link"}